184000968 - 1060G20 RPM AND TIMING SENSOR - R R

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the stop position, then disconnect the battery negative terminal.

NameConnector
-Battery A1B
Proceed with removal    Op. 7055B54 UNDER-ENGINE GUARD - R R.1. Disconnect the electrical connection for the rpm sensor.

NameConnector
1Rpm sensor K46
2. Undo the bolt (2a) and remove the rpm sensor (2b).
Refitting ( Removing ) Replace the rear wheel rpm sensor in its housing and fix it using the bolt.Connect the electrical connection for the rpm sensor.Proceed with refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Connect the battery terminal (-).Remove the car from the ramps.