184000972 - 1060G42 CLUTCH PEDAL SWITCH - R R

Removing ( Refitting ) Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

NameConnector
-Battery A1B
Proceed with removal 7040L37 gear lever plate - r r .Proceed with removal 7040A65 passenger compartment box lock , one , r r .Proceed with removal 7040A19 cushion padding - r r .Proceed with removal    Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R..Proceed with removal 7040A30 Left instrument panel lower TRIM - R.R. .1. Undo the bolts (1a) and remove the bottom reinforcement for the underdashboard crossmember (1b).
1. Disconnect the electrical connection from the clutch pedal switch.

NameConnector
1Clutch pedal switch I31
2. Rotate the clutch pedal switch and remove it.
Refitting ( Removing ) Place the clutch pedal switch in its housing rotating it in a clockwise/anti-clockwise direction until the retainer tooth can be heard clicking into the seat on the bracket.Connect the electrical connection to the clutch pedal switch.Place the lower reinforcement in its housing on the underdashboard crossmember and fasten it using the bolts.Proceed with refitting 7040A30 Left instrument panel lower TRIM - R.R. .Proceed with refitting    Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R..Proceed with refitting 7040A19 cushion padding - r r .Proceed with refitting 7040A65 passenger compartment box lock , one , r r .Proceed with refitting 7040L37 gear lever plate - r r .Connect the negative (-) battery terminal.