184000973 - 1060G50 PNEUMATICALLY CONTROLLED THROTTLE BODY R R

Removing ( Refitting ) Proceed with removal 1016A10 sound-proofing cover - r + r .Proceed with removal    Op. 5530B10 BATTERY - R+R.Proceed with removal    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..1. Loosen the band fixing the air inlet hose to the electropneumatic throttle body.2. Disconnect the vacuum pipe from the pneumatic valve on the electropneumatic throttle body.3. Undo the bolts (3a) recuring the rigid pipe from the E.G.R. solenoid to the throttle body (3b), E.G.R. valve side.4. Undo the bolts (4a) and remove the electropneumatic throttle body (4b).Remove the gasket.
Refitting ( Removing ) Replace the pneumatically-controlled throttle body, complete with gasket, back in its housing and fix it tightening the bolts to the recommended torque.

FasteningComponentØValue(daNm)
-----
Tighten the bolts securing the rigid pipe from E.G.R. solenoid to throttle body, E.G.R. valve side.Connect the vacuum pipe to the pneumatic valve on the electropneumatically-controlled throttle body.Tighten the band securing the air inlet hose to the electropneumatic throttle body.Proceed with refitting    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with refitting    Op. 5530B10 BATTERY - R+R.Proceed with refitting 1016A10 sound-proofing cover - r + r .