1068A20 ACCELERATOR PEDAL WITH BUILT-IN POTENTIOMETER - R R - Lancia - MUSA - eLearn

184000988 - 1068A20 ACCELERATOR PEDAL WITH BUILT-IN POTENTIOMETER - R R

) Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal 7040L37 gear lever plate - r r .Proceed with removal 7040A65 passenger compartment box lock , one , r r .Proceed with removal 7040A19 cushion padding - r r .Proceed with removal Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R..Proceed with removal 7040A30 Left instrument panel lower TRIM - R.R. .1. Undo the bolts (1a) and remove the bottom reinforcement for the underdashboard crossmember (1b).

1. Disconnect the electrical connection for the accelerator pedal with built-in potentiometer.

	Name	Connector
1	Accelerator pedal potentiometer	K55

2. Undo the bolts (2a) and remove the accelerator pedal with built-in potentiometer (2b).

Refitting ( Removing

) Connect the electrical connection to the accelerator pedal with built-in potentiometer.Place the accelerator pedal with built-in potentiometer back in its housing and secure it using the bolts.Place the lower reinforcement in its housing on the underdashboard crossmember and fasten it using the bolts.Proceed with refitting 7040A30 Left instrument panel lower TRIM - R.R. .Proceed with refitting Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R..Proceed with refitting 7040A19 cushion padding - r r .Proceed with refitting 7040A65 passenger compartment box lock , one , r r .Proceed with refitting 7040L37 gear lever plate - r r .Connect the negative (-) battery terminal