184000999 - 1076A40 EXHAUST PIPE HEAT SHIELD - R R

Removing ( Refitting ) Position the vehicle on the ramp.1. Undo the nuts fixing the exhaust pipe between the precatalyzer and the catalyzer, catalyzer side.2. Unscrew the bolt securing the flexible block mounting bracket and lower the exhaust pipe.3. Undo retaining bolts (3a) and remove the front heat shield (3b).
1. Open the band retaining the handbrake cable.2. Undo the nuts (2a), remove the clip (2b) and remove the central heat shield (2c).
Refitting ( Removing ) Place the centre heat shield back in its housing and secure it using the clip and nuts.Close the band securing the handbrake cable.Place the front heat shield back in its housing and fix it using the boltsRefit the exhaust pipe and tighten the bolt securing the flexible block mounting bracket.Tighten the nuts fixing the exhaust pipe between the precatalyzer and the catalyzer, catalyzer side, to the specified torque.

FasteningComponentØValue(daNm)
-NutPRE-CAT CONVERTOR/CAT CONVERTOR PIPEM8(Catalytic converter side) 2.3 ÷ 2.8
Remove the car from the ramp.