184001004 - 1076B34 FRONT CATALYTIC CONVERTER ATTACHMENT SEAL - REPLACE
Removing
(
Refitting
)
Position the vehicle on the ramp.1. Undo the nuts fixing the exhaust pipe between the precatalyzer and the catalyzer, catalyzer side.2. Release the exhaust pipe between precatalyzer and catalyzer from the flexible mounting block.3. Remove the gasket from its seat.
Refitting
(
Removing
)
Place a new gasket in its seat.Secure the exhaust pipe between precatalyzer and catalyzer to the flexible mounting block.Tighten the nuts securing the exhaust pipe between precatalyzer and catalyzer, catalyzer side, to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Nut | PRE-CAT CONVERTOR/CAT CONVERTOR PIPE | M8 |