1076B70 EXHAUST PIPE BETWEEN PRE-CATALYTIC CONVERTER AND CATALYTIC CONVERTER - R R - Lancia - MUSA - eLearn

184001006 - 1076B70 EXHAUST PIPE BETWEEN PRE-CATALYTIC CONVERTER AND CATALYTIC CONVERTER - R R

) Position the vehicle on the ramp.Proceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R R.1. Undo the nuts fixing the exhaust pipe between the precatalyzer and the catalyzer to the catalytic preconverter.2. Undo the nuts fixing the exhaust pipe between the precatalyzer and the catalyzer, catalytic converter side.3. Undo the nuts securing the exhaust pipe mounting collar between precatalyzer and catalytic converter.4. Remove the exhaust pipe between the precatalyzer and the catalytic converter, complete with gaskets, after releasing it from the flexible block.

Refitting ( Removing

) 1. Place the exhaust pipe between the precatalyzer and the catalyzer complete with gaskets back in its housing.2. Tighten the nuts securing the exhaust pipe mounting collar between precatalyzer and catalytic converter.3. Tighten the nuts fixing the exhaust pipe between the precatalyzer and the catalyzer, catalytic converter side, to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
3	Nut	PRE-CAT CONVERTOR/CAT CONVERTOR PIPE	M8	(Catalytic converter side) 2.3 ÷ 2.8

4. Tighten the nuts fixing the exhaust pipe between the precatalyzer and the catalyzer to the catalytic preconverter to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
4	Nut	PRE-CAT CONVERTOR/CAT CONVERTOR PIPE	M8

Proceed with refitting Op. 7055B54 UNDER-ENGINE GUARD - R R.Remove the car from the ramps.