184001013 - 1080B90 LAMBDA SENSOR - R.R.
Removing
(
Refitting
)
Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).
| Name | Connector |
|---|
| - | Battery | A1B |
1. Disconnect the electrical connection for the Lambda sensor.
| Name | Connector |
|---|
| 1 | Lambda sensor | K40 |
1. Undo the Lambda sensor and remove it.
Refitting
(
Removing
)
Place the Lambda sensor back in its housing and tighten it to the specified torque.
| Fastening | Component | Ø | Value(daNm) |
|---|
| - | - | - | - | - |
Connect the electrical connection for the Lambda sensor.Connect the negative (-) battery terminal
