184001017 - 1080C24 E.G.R. SYSTEM SOLENOID - R + R

Removing ( Refitting ) Proceed with removal 1016A10 sound-proofing cover - r + r .Proceed with removal    Op. 5530B10 BATTERY - R+R.Proceed with removal    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..1. Disconnect the electrical connection from the E.G.R. valve.

NameConnector
1EGR solenoid L30
2. Undo the bolt fixing the E.G.R. system solenoid valve to the intake manifold.3. Undo the bolts fixing the exhaust gas supply pipe from the E.G.R. valve to the intake manifold, E.G.R. valve side.4. Loosen the collar fixing the exhaust gas inlet pipe to the E.G.R. system solenoid valve, heat exchanger side.5. Remove the E.G.R. system solenoid valve (5a) complete with exhaust gas inlet pipe (5b) and, if necessary, separate them at the bench.
Refitting ( Removing ) Place the E.G.R. system solenoid valve back in its housing complete with exhaust gas inlet pipe.Tighten the bolts fixing the E.G.R. system solenoid valve to the intake manifold.Tighten the collar fixing the exhaust gas inlet pipe to the E.G.R. system solenoid valve, heat exchanger side.Tighten the bolts fixing the exhaust gas supply pipe from the E.G.R. valve to the intake manifold, E.G.R. valve side.Connect the electrical connection to the E.G.R. valve.Proceed with refitting    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.. - Proceed with refitting    Op. 5530B10 BATTERY - R+R.Proceed with refitting 1016A10 sound-proofing cover - r + r .