184001041 - 1084A42 ENGINE OIL TEMPERATURE SENDER UNIT - R + R

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the stop position, then disconnect the battery negative terminal.

NameConnector
-Battery A1B
Proceed with removal    Op. 7055B54 UNDER-ENGINE GUARD - R R.1. Disconnect the electrical connection from the engine oil pressure warning light switch.

NameConnector
1Engine oil pressure sensor (switch) K30
2. Undo and remove the engine oil pressure warning light switch.
Refitting ( Removing ) Fit the engine oil pressure warning light switch in its seating and tighten it to the recommended torque.

FasteningComponentØValue(daNm)
--OIL PRESSURE W/LM14(Engine crankcase side) 2.7 ÷ 3.3
Connect the electrical connection to the engine oil pressure warning light switch.Proceed with refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Connect the negative (-) battery terminalRemove the car from the ramps.