184001066 - 1088C14 WATER PUMP - R + R WITH DRIVE BELT REMOVED

Removing ( Refitting ) Proceed with removal    Op. 1032B40 TOOTHED-DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED.1. Undo the bolts (1a) and move the cam angle sensor (1b) without disconnecting the electrical connection. 1. Undo the bolts (1a) and remove the water pump (1b) complete with O-Ring (1c). Refitting ( Removing ) 1. Place water pump (1a), complete with O-ring (1b), back in its housing and fix it tightening the bolts (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1c	Bolt	OIL SUMP	M8	(Engine crankcase side) 2.3 ÷ 2.8

Place the cam angle sensor back in its housing and fix it using the bolt.Proceed with refitting    Op. 1032B40 TOOTHED-DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED.