184001089 - 1092G10 SINGLE ENGINE BELT R R

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B04 RIGHT FRONT WHEEL R R.Proceed with removal    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with removal    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..1. Adjust the moving tensioner to loosen the engine components single drive belt tension.2. Remove the engine components single drive belt.
Refitting ( Removing ) .
Do not allow oil or solvents to come into contact with the belt, as these could affect the flexibility of the rubber, resulting in reduced grip.
Also check that there are no cracks or cuts on the belt, otherwise it will have to be replaced.Adjust the moving tensioner and fit the engine components single drive belt.
The moving tensioner is an automatic device and thanks to a preloaded spring adjusts the belt to the correct tension upon installation and automatically takes up any slack in the belt.
Proceed with refitting    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..Proceed with refitting    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Remove the car from the ramps.