184001092 - 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B04 RIGHT FRONT WHEEL R R.Proceed with removal    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with removal    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..Proceed with removal 1092G10 single engine belt r r FOR THE UPPER FIXED TENSIONER, PROCEED AS DESCRIBED BELOW1. Undo the bolt (1a) and remove the fixed single drive belt tensioner (1b).
FOR THE LOWER FIXED TENSIONER, PROCEED AS DESCRIBED BELOW1. Remove the protective cap.2. Undo the bolt (2a) and remove the single drive belt fixed tensioner (2b).
Refitting ( Removing ) FOR THE LOWER FIXED TENSIONER, PROCEED AS DESCRIBED BELOWPlace the engine components single drive belt fixed tensioner back in its housing and fix it tightening the bolt to the recommended torque.

FasteningComponentØValue(daNm)
-BoltFIXED SINGLE SERVICE BELT TENSIONERM104.5 ÷ 5.5
Place the protective cap back in position.FOR THE UPPER FIXED TENSIONER, PROCEED AS DESCRIBED BELOWPlace the engine components single drive belt fixed tensioner back in its housing and fix it tightening the bolt to the recommended torque.

FasteningComponentØValue(daNm)
-BoltFIXED SINGLE SERVICE BELT TENSIONERM104.5 ÷ 5.5
Proceed with refitting 1092G10 single engine belt r r .Proceed with refitting    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..Proceed with refitting    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Remove the car from the ramps.