184001109 - 1820B38 CLUTCH HYDRAULIC ACTUATOR/OPERATING CYLINDER - R.R. AND BLEED AIR WITH CLUTCH REMOVED
Removing
(
Refitting
)
1. Undo the bolts (1a) and remove the hydraulic clutch actuator (1b).
Refitting
(
Removing
)
Clean any residues of sealant from the matching surfaces between the hydraulic clutch actuator and the gearbox.Apply silicone sealant to the matching surface of the hydraulic clutch actuator and the gearbox.Place the hydraulic clutch actuator back in its housing and secure it by tightening the bolts to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | CLUTCH CONTROL HYDRAULIC ACTIVATOR | M8 | (Gearbox side) 0.6 ÷ 1.2 |