1820B53 VIBRATION DAMPER RIGID INLET PIPE - R.R. - Lancia - MUSA - eLearn

184001112 - 1820B53 Vibration damper RIGID inlet PIPE - R.R.

) Position the vehicle on the rampProceed with removal Op. 4450B02 LEFT FRONT WHEEL R R.Proceed with removal Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R..1. Lift up the retaining clip (1a) and disconnect the flexible pipe (1b) from the rigid pipe.

Collect the brake-clutch fluid which comes out in a suitable container.

2. Open the vibration damper rigid inlet pipe fastening band.

1. Lift up the retaining clip (1a) and disconnect the damper rigid inlet pipe (1b), master cylinder side.2. Remove the vibration damper rigid inlet pipe.

Refitting ( Removing

) Place the vibration damper rigid inlet pipe back in its housing.Connect the damper rigid inlet pipe, master cylinder side and secure it using the retaining clip.Close the vibration damper rigid inlet pipe fastening band.Connect the flexible pipe to the rigid pipe and secure it using the retaining clip.Proceed with refitting Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.Proceed with refitting 0010T67 hydraulic clutch system bleed air .Proceed with refitting Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R..Proceed with refitting Op. 4450B02 LEFT FRONT WHEEL R R.Remove the car from the ramps.