184001183 - 2710A32 INTERMEDIATE DRIVE SHAFT BEARING SUPPORT - R + R WITH INTERMEDIATE DRIVE SHAFT REMOVED

Removing ( Refitting ) 1. Undo the fixing bolt (1a) and move the electric wiring mounting bracket (1b) to the side. 1. Undo the nut for the lower bolt fixing the alternator to the mounting and partly release the bolt.2. Undo the bolts (2a) and remove the intermediate driveshaft bearing support (2b). Refitting ( Removing ) 1. Refit the intermediate driveshaft bearing support (1a) in its seating and tighten the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT DRIVE SHAFT BEARING MOUNT	M10	(Crankcase side) 4.5 ÷ 5.5

2. Tighten the lower bolt fixing the alternator to the mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	ALTERNATOR ASSEMBLY	M12	(Support side) 6.3 ÷ 7.7

Place the electrical wiring mounting bracket back in its seating and tighten the bolt.