4410D14 FRONT SUSPENSION CROSSBEAM - R+R WITH WISHBONES REMOVED - Lancia - MUSA - eLearn

184001287 - 4410D14 FRONT SUSPENSION CROSSBEAM - R+R WITH WISHBONES REMOVED

) 1. Place the front suspension crossmember back in its housing using the hydraulic jack.2. Tighten the bolts (2a) and (2b) fixing the front suspension crossmember to the bodyshell to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2a	Side bolt	ENGINE OR ROD ANCHORAGE BEAM	M12	(Bodyshell side) 10.5 ÷11.6

	Fastening	Component	Ø	Value(daNm)
2b	Rear bolt	ENGINE OR ROD ANCHORAGE BEAM	M12	(Bodyshell side) 11.4 ÷ 12.6

3. Remove the hydraulic jack from underneath the front suspension crossmember.4. Tighten the bolts fixing the power steering box to the front suspension crossmember to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
4	Bolt	STEERING BOX (RACK AND PINION)	M12	(Front suspension crossmember side) 6.7 ÷ 7.4

Proceed with removal 1076B70 exhaust pipe between pre-catalytic converter and catalytic converter - r r . Proceed with removal 1008C30 power unit lower reaction link r r .1. Undo the bolts fixing the steering box to the front suspension crossmember.2. Position a hydraulic jack under the front suspension crossmember.3. Undo the bolts fixing the front suspension crossmember to the bodyshell.4. Remove the front suspension crossmember lowering the hydraulic jack.

Proceed with refitting 1008C30 power unit lower reaction link r r . Proceed with removal 1076B70 exhaust pipe between pre-catalytic converter and catalytic converter - r r .