184001653 - 7025A10 BONNET LID - SQUARE

Lift the bonnet lid.1. If necessary, adjust the buffer blocks.2. If necessary, adjust the lock position.    Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR.
1. If necessary, undo the hinge bolts and adjust the bonnet position. The arrows indicate possible movements.Tighten the hinge bolts.

FasteningComponentØValue(daNm)
-BoltBONNET LIDM60.8
If the adjustments described above are insufficient, adjust bonnet lid hinge position as described below.    Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R    Op. 7210E22 WINDSCREEN BASE TRIM 7035A54 WINDSCREEN BASE LOWER SUPPORT (one), left or right for attaching windscreen protective grille - R.R. 1. Loosen the bolts with nut (1a) securing the hinges (1b) and adjust the position until the bonnet lid is aligned. The arrows (1c) indicate the possible movements.2. Tighten the bolts and nut.

FasteningComponentØValue(daNm)
2NutBONNET LID HINGESM82.4
Touch up the paintwork in the hinge area. 7035A54 WINDSCREEN BASE LOWER SUPPORT (one), left or right for attaching windscreen protective grille - R.R.     Op. 7210E22 WINDSCREEN BASE TRIM    Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R