Removing
(
Refitting
)
Position the vehicle on a lift.Open the bonnet.1. Working on both sides of the vehicle, undo the bolts (1a) fixing the front wheel arches (1b).
1. Move the wheel arches (1a) slightly and undo the side bolts (1b) fixing the bumper.2. Disconnect the electrical connections for the fog lights.
Description
Connector
2
Left fog lamp
See F15 LEFT FOG LAMP
Description
Connector
2
Right fog lamp
See F16 RIGHT FOG LAMP
Raise the vehicle.1. Undo the lower bolts fixing the bumper.Lower the vehicle.1. Undo the upper bolts fixing the bumper.2. Remove the bumper.If necessary see in op. 7205E10Refitting
(
Removing
)
Check that the bumper is not damaged.1. Place the bumper (1a) in position and attach the pins (1b) and the slots (1c) in the housings on both sides.2. Tighten the side bolts.Tighten the upper bolts fixing the bumper.Raise the vehicle and tighten the bumper lower fixing bolts.Connect the electrical connections for the fog lights.Tighten the front wheel arch fixing bolts.Close the bonnet again.Remove the vehicle from the lift.If necessary, Op. 5540D38 FOG LAMP BEAM - ADJUST
Removing
(
Refitting
)
Position the vehicle on a lift.Open the bonnet.1. Working on both sides of the vehicle, undo the bolts (1a) fixing the front wheel arches (1b).
