Removing
(
Refitting
)
- Open the bonnet lid and disconnect the battery.- If the negative terminal is equipped with a fast-opening terminal, proceed as follows.1. Turn cam lever (1b) and raise terminal (1a).
Description
Connector
BATTERY
See A1 BATTERY
1. Undo the nut.2. Move the retainer.3. Remove the battery with care.
Refitting
(
Removing
)
Check that the battery is efficient.Position the battery, arrange the retainer and tighten the nut.
Fastening
Component
Ø
Value(daNm)
-
Nut
BATTERY RETAINING STRAP
M8
Connect the electrical connections.Test the operation of the electrical system.
Removing
(
Refitting
)
- Open the bonnet lid and disconnect the battery.- If the negative terminal is equipped with a fast-opening terminal, proceed as follows.1. Turn cam lever (1b) and raise terminal (1a).
