| | Results of the tests |
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|
| Turn the key to the ON position and check that all the lights (side and no. plate) come on when the side lights are activated.Turn the ignition OFF, activate the parking lights using the switch in the control panel and check that the lights remain on | End of diagnosis | The side lights doe not come on with the key in the ON position | Continue as instructed See table I01 SIDE LIGHTS/NO. PLATE LIGHTS NOT WORKING |
| The side lights do not remain on with the parking lights | Continue as instructed See table I02 PARKING LIGHTS NOT WORKING |
| The no. plate lights only do not work | Continue to Step 1 |
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Connect the Examiner to the diagnostic equipment and check that there are no faults at the Body Computer Node | Continue to Step 2 | Presence of faults | Continue following the instructions for the diagnostic equipment |
| 2 | ACTIVE DIAGNOSIS | All OK | Problems met | Operation |
|---|
| Keeping the diagnostic equipment connected, check number plate light bulb operation by mean of active diagnosis: | Continue to Step 4 | The no. plate lights do not come on | Continue to Step 3 |
| 3 | CHECKING ELECTRICAL EQUIPMENT | All OK | Problems met | Operation |
|---|
| Check the condition of the bulbs.Check the continuity and the insulation of the wiring between the Body Computer Node and the number plate lights connector | Continue to Step 4 | Blown bulbs | Replace the no. plate light Op. 5540A94 |
| Connections broken | Renew the electrical connections See E2010 SIDE LIGHTS / NO. PLATE LIGHTS |
| 4 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace the Body Computer Op. 5505A32 |
