| | Results of the tests |
| 1 | SERVICES RELAY CHECK (POWER CIRCUIT) | All OK | Problems met | Operation |
|---|
| With the ignition ON, check that the additional rear current socket is working properly. The socket is located under the rear parcel shelf support, on the left hand side.It is possible, for example, to insert the cigar lighter and check that it heats up | Continue to Step 4 | The additional rear current socket is also not working | Continue to Step 2 |
| 2 | SERVICES RELAY POWER SUPPLY CHECK (POWER CIRCUIT) | All OK | Problems met | Operation |
|---|
| Check that the services discharge replay is correctly supplied by the battery.With the ignition ON, connect to the power supply for the relay from the Body Computer and check that the supply is sent to the relay when the electric windows are activated.Also check that the electrical connections between the Body Computer, the battery and the relay are not faulty See E3032 DOOR MIRROR ADJUSTMENT  | Do not disconnect the relay |
| Continue to Step 3 | No power supply from the battery | Restore the correct power supply to the relay. If necessary, replace the faulty components (if a fuse is involved, search for the cause of the problem first). |
| Supply enablement not provided by the Body Computer | Replace the Body Computer Op. 5505A32 |
| Connections faulty | Restore the correct connections. See E3032 DOOR MIRROR ADJUSTMENT |
| 3 | RELAY OUTPUT CHECK | All OK | Problems met | Operation |
|---|
| With the ignition ON, connect to the relay output and check that the supply is sent to the electric windows circuit when the electric windows are activated.Also check that the connections between the services relay and the Driver's/Passenger Door Node are not faulty See E3032 DOOR MIRROR ADJUSTMENT | Continue to Step 4 | The power supply is not sent to the circuit | Replace the services relay |
| Connections faulty | Restore the correct connections. See E3032 DOOR MIRROR ADJUSTMENT |
| 4 | MIRROR MOVEMENT CIRCUIT CHECK | All OK | Problems met | Operation |
|---|
| The problem is due to the simultaneous presence of problems in the two rear view mirror circuits bearing in mind that the problems could be different for the two mirrors | See table J41 | Fault persists | Search for the fault starting from another symptom' |
| | Results of the tests |
| 1 | ELECTRICAL CONNECTIONS CHECK | All OK | Problems met | Operation |
|---|
| Check that both the power supply and earth electrical connections for the electric mirrors movement circuit are correct See E3032 DOOR MIRROR ADJUSTMENT | Continue to Step 2 | Connections faulty | Restore the correct connections. |
| 2 | JOYSTICK CHECK | All OK | Problems met | Operation |
|---|
| Check that the joystick is working properly | Continue to Step 3 | Joystick faulty | Replace the door mirrors joystick Op. 7005R40 |
| 3 | MIRROR MOTORS CHECK | All OK | Problems met | Operation |
|---|
| Check that the mirror movement motors are working properly | Continue to Step 4 | Mirror motors faulty | Replace the rear view mirror motor Op. 7005R36 |
| 4 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' |