K104 DISPLAY DOES NOT SHOW HEADLAMP ALIGNMENT DATA - Lancia - MUSA - eLearn

184000487 - K104 DISPLAY DOES NOT SHOW HEADLAMP ALIGNMENT DATA

When the headlamp adjustment buttons are operated (with dipped beam headlamps on), the information on the display does not change. If the headlamp adjustment does not work, first see Table I080

1	CHECK ON HEADLAMP ALIGNMENT CORRECTOR ELECTRICAL CIRCUIT	All OK	Problems met	Operation
		Results of the tests
	Check: connection of left controls panel unit and instrument panel node - left controls panel unit earth - connection between dashboard control unit and instrument panel See E3080 HEADLAMP AGLINMENT CORRECTOR	Continue to Step 2	Connections not correct	Restore the connections See E3080 HEADLAMP AGLINMENT CORRECTOR
		Continue to Step 2	Earths defective	Restore the earth contacts See E3080 HEADLAMP AGLINMENT CORRECTOR
2	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connecct the diagnostic instrument (Examiner Plus or Smart) to the diagnostic socket and check, through the active diagnosis on the instrument panel, that all the segments of the display are working properly	Continue to Step 3	One or several segments are not working	Replace instrument panel Op. 5560B11
3	Replace instrument panel	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	.