184000616 - Z64 ABS CHARGE/DISCHARGE VALVE ERROR
The diagnostic equipment signals one or more of the following errors: C1070 ABS valve, right front discharging, C1075, ABS valve, right front pressurizing, C11060 ABS valve, left front discharging, C1065 ABS valve, left front pressurizing, C1090 ABS valve, right rear discharging, C1095 ABS valve, right rear pressurizing, C1080 ABS valve, left rear discharging and/or C12085 ABS valve, left rear pressurizing | This error is signalled if the ABS solenoid valves cannot be activated. This means that there is an open circuit or short circuit (positive or earth) for the solenoid valves or the connection |
| Results of the tests | ||||
| 1 | ABS CONTROL UNIT REPLACEMENT | All OK | Problems encountered | Operation |
|---|---|---|---|---|
| Replace the ABS electrohydraulic control unit Op. Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT | Move on to Step 2 | - | - | |
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems encountered | Operation |
| Delete the errors using the diagnostic equipment.Turn the key OFF and then ON to ensure that the control unit checks whether the errors are still present.Check that the fault is no longer present | End of diagnosis | - | - | |