184000626 - Z78 STEERING ANGLE SENSOR NOT CALIBRATED ERROR

The diagnostic equipment signals the following error: "C1417 - Steering Angle Sensor not calibrated"

This error is signalled if the calibration of the steering angle sensor has not be carried out. The sensor is incorporated in the electric steering

		Results of the tests
1	STEERING ANGLE CALIBRATION	All OK	Problems encountered	Operation
	Connect the diagnostic equipment and, in the ACTIVE DIAGNOSIS ambient, carry out the STEERING ANGLE CALIBRATION, making sure that the result is positive	Move on to Step 2	The outcome of the procedure is not positive	Replace the steering angle sensor    Op. 3350E20 STEERING ANGLE SENSOR R R
2	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Delete the errors using the diagnostic equipment.Carry out a road test to ensure that the control unit checks whether there are any errors still present. See Test 3350EB STEERING ANGLE SENSOR OPERATION CHECKReturn to the workshop and check that the fault is no longer present using the diagnostic equipment	End of diagnosis	.	-