Z80 ENGINE CAN MESSAGE ERROR - Lancia - MUSA - eLearn

184000628 - Z80 ENGINE CAN MESSAGE ERROR

Ошибка в шаблоне. В ближайшее время мы ее исправим. (Error in Templaite)

error C1101 is signalled if the brake control unit detects invalid messages from the Engine Management control unit. Error U1701 is signalled if the control unit does not detect the Engine Management control unit.

1	ENGINE MANAGEMENT CONTROL UNIT POWER SUPPLY CHECK	All OK	Problems encountered	Operation
		Results of the tests
petrol engine	Check that the engine management control unit is receiving the correct power supply See E5030 GESTIONE ELETTRONICA MOTORI BENZINA	Move on to Step 2	Engine management control unit power supply missing	Restore the control unit power supply
petrol engine		Move on to Step 2	Presence of error in engine management control unit	Eliminate the cause of the error in the engine management control unit
diesel engine	Check that the engine management control unit is receiving the correct power supply See E5050 GESTIONE ELETTRONICA MOTORI DIESEL	Move on to Step 2	Engine management control unit power supply missing	Restore the control unit power supply
diesel engine		Move on to Step 2	Presence of error in engine management control unit	Eliminate the cause of the error in the engine management control unit
2	CHECK USING THE EXAMINER	All OK	Problems encountered	Operation
	Check that there are no errors in the engine management control unit	Move on to Step 3	Presence of errors in the engine management control unit	Eliminate the problem detected and move on to Step 5
3	ACCELERATOR PEDAL POTENTIOMETER CHECK	All OK	Problems encountered	Operation
	Using the Examiner, check that the accelerator pedal potentiometers are working properly	Move on to Step 4	Accelerator pedal potentiometer defective	Replace the pedal Op. 1068A20 ACCELERATOR PEDAL WITH BUILT-IN POTENTIOMETER - R Rand move on to Step 5
4	ELECTRICAL CONNECTIONS CHECK	All OK	Problems encountered	Operation
	Check that the connection between the engine management control unit and the ABS control unit is correct See E7020 ABS	Move on to Step 5	CAN electrical connections faulty	Restore the correct connection and move on to Step 5
5	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Delete the errors using the diagnostic equipment.Carry out a road test to ensure that the control unit checks whether there are any errors still present. See Test 3350EA ESP SYSTEM ACTUATION CHECKReturn to the workshop and check that the fault is no longer present using the diagnostic equipment	End of diagnosis	The fault persists	Move on to Step 1