184000634 - Z86 SOLENOID VALVE OVERHEATING ERROR

Ошибка в шаблоне. В ближайшее время мы ее исправим. (Error in Templaite)

This error is signalled if they are activated for too long during the fault diagnosis in order to conserve them.

	Results of the tests
1	SOLENOID VALVE COOLING	All OK	Problems encountered	Operation
	Avoid activating the solenoid valves with the diagnostic equipment for at least ten minutes. Blow through with compressed air in the electrohydraulic unit	Move on to Step 2	-	-
2	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Delete the error using the diagnostic equipment. Carry out a road test for the control unit to check whether any errors are still present. Return to the workshop and check that the fault is no longer present using the diagnostic equipment	End of diagnosis	-	-