184000639 - Z91 MAGNETIC WHEEL ERROR
Ошибка в шаблоне. В ближайшее время мы ее исправим. (Error in Templaite)
 | This error is signalled if there is a lack of impulses for the speed signal for one of the wheels |
| |
| Results of the tests |
| 1 | FLYWHEEL TRACK CHECK | All OK | Problems encountered | Operation |
|---|
| Check the condition of the flywheel, removing the wheel if necessary. Check that there are no metal shavings on the flywheel magnetic tracks. Check that all the small magnets are correctly positioned. | Move on to Step 2 | Metal shavings present | Clean the flywheel track |
| Flywheel damaged | Change the flywheel |
| Small magnets missing or damaged | Change the flywheel |
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems encountered | Operation |
|---|
| Delete the errors using the diagnostic equipment. Carry out a road test See Test 3340OA A.B.S. SYSTEM ACTUATION CHECKto ensure that the control unit checks whether the errors are present. To evaluate the correctness of the speed signal, follow the "Detecting flywheel signal" procedure. Return to the workshop and check that the fault is no longer present using the Examiner. | End of diagnosis | The fault persists | Move on to Step 1 |