184001045 - 1084B18 ENGINE OIL PUMP, REMOVED - CHECK AT BENCH

Removing ( Refitting ) 1. Undo the bolts (1a) and remove the intake (1b).2. Remove the seal.3. Undo the bolts (3a) and remove the oil pump cover (3b).

Use a percussion screwdriver to undo these bolts.

4. Remove the driven gear.5. Remove the drive gear. - Remove the crankshaft front oil seal Refitting ( Removing ) 1. Check that the radial clearance between the driven gear and the pump casing is within the recommended limits.

Gioco radiale tra ingranaggio condotto e corpo pompa

0.080 ÷ 0.186 mm

1.4 8v

- Fit the drive gear.- Fit the driven gear.- Fit the oil pump cover

Manually rotate the gears to check that they turn without sticking.

- Fit the engine oil intake complete with O-Ring and secure it using the bolts.

The crankshaft front oil should be fitted with the engine oil pump fitted on the crankcase.