184002731 - E5060 CRUISE CONTROL - FUNCTIONAL DESCRIPTION

Operational description

The Cruise Control function is managed by engine management control unit M10 , upon a command by Cruise Control stalk H7 , located to the left of the steering wheel.Control H7 is ignition-operated (INT) - pin 2 - by a line protected by fuse F35 of under-dashboard control unit B2 .

The control H7 is connected to control unit M10:

• at pin 33 of connector A, with the ON/OFF signal
• at pin 17 of connector A, with the RESUME signal
• at pin 21 of connector A, with the SET + signal
• at pin 41 of connector A, with the SET - signal

The control unit M10 also uses the "pedal released" signals (N.C. contact) coming from the second brake lights switch contact I30 and the signal coming from the clutch switch I31 to manage the Cruise Control function.     See E5030 PETROL ENGINE ELECTRONIC MANAGEMENT.Engine management control unit M10 connects via the CAN line to Body Computer M1 and instrument panel E50 to manage the Cruise Control on warning light.