184001805 - 7055A14 DRIP CHANNELS ON DOOR COMPARTMENT (ONE), L/H OR R/H - R+R
Removing
(
Refitting
)
Open the doors.1. Remove drip channel (1a) by detaching the adhesive strip (1b) and undoing retainers (1c). Start at one of the ends (1d).
Refitting
(
Removing
)
Use heptane to clean the body surfaces to which the drip channel will be bonded.Heat the surfaces to be bonded to at least 18 C.1. Starting at one end (1a) of the drip channel, peel away a small section of film (1b) protecting adhesive tape (1c).2. Position the first end of the drip channel in place and do up the first retainer. Then stick down the adhesive strip.3. Continue with small sections until all the drip channel is stuck down.4. Press down the entire drip channel vigorously, section by section, to improve the adhesion of the adhesive strrip.
Removing
(
Refitting
)
Open the doors.1. Remove drip channel (1a) by detaching the adhesive strip (1b) and undoing retainers (1c). Start at one of the ends (1d).
