184000872 - 1032C40 TIMING CHAIN TENSIONER PLATE - R.R.

Removing ( Refitting ) Position the vehicle on the rampMake sure that the ignition key is in the OFF position. then disconnect the battery negative (-) terminal.

NameConnector
-Battery A1B
Drain the air conditioner coolant circuit    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM DEHYDRATE AND RECHARGE.Proceed with removal    Op. 4450B04 RIGHT FRONT WHEEL R RProceed with removalProceed with removal    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.Proceed with removalProceed with removal    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.Proceed with removalProceed with removal 1092G10 single engine belt r r Proceed with removalProceed with removal    Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R.Proceed with removalPROCEED AS FOLLOWS FOR THE MOBILE PAD    Op. 7055B54 UNDER-ENGINE GUARD - R R1. Withdraw pin (1a)a nd remove the mobile pad of timing chain (1b).    Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R    Op. 1020A20 CRANK CASE OIL SUMP - R + R CLEAN SEALS FOR SEALANT APPLICATION 1020B10 cover of timing system with chain drive - r + r replace oil seal and gasket     Op. 1032A12 CHAIN AND GEARS FOR TIMING SYSTEM - R.R. FOR TIMING OR REPLACEMENT.
PROCEED AS FOLLOWS FOR THE FIXED PAD1. Undo the bolts (1a) and remove the timing belt fixed pad (1b).
Refitting ( Removing ) PROCEED AS FOLLOWS FOR THE FIXED PADRefit the fixed timing belt pad in its seat and secure with bolts.PROCEED AS FOLLOWS FOR THE MOBILE PADRefit the mobile timing belt pad in its seat and secure with bolts.Proceed with refitting    Op. 1032A12 CHAIN AND GEARS FOR TIMING SYSTEM - R.R. FOR TIMING OR REPLACEMENT..Proceed with refitting 1020B10 cover of timing system with chain drive - r + r replace oil seal and gasket .Proceed with refitting    Op. 1020A20 CRANK CASE OIL SUMP - R + R CLEAN SEALS FOR SEALANT APPLICATION.Proceed with refitting    Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R.Proceed with refitting    Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..Proceed with refitting 1092G10 single engine belt r r .Proceed with refitting    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..Proceed with refitting    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Connect the negative (-) battery terminal.Refill the engine oil lubrication system    Op. 0010T11 ENGINE OIL CHECK LEVEL AND TOP UP.Refill the engine cooling system with coolant    Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY.Fill the air conditioner coolant circuit    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM DEHYDRATE AND RECHARGE.Proceed with removal    Op. 7055B54 UNDER-ENGINE GUARD - R R.Remove the car from the ramps.