Removing
(
Refitting
)
Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).
Name
Connector
-
Battery
A1B
Proceed with removal 7040L37 gear lever plate - r r Proceed with removalProceed with removal 7040A65 passenger compartment box lock , one , r r Proceed with removalProceed with removal 7040A19 cushion padding - r r 1. Undo the bolts (1a) and remove the lower reinforcement for the underdashboard crossmember (1b). Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R. 7040A30 Left instrument panel lower TRIM - R.R.
1. Disconnect the electrical connection from the clutch pedal switch.
Name
Connector
1
Clutch pedal switch
I31
2. Rotate the clutch pedal switch and remove it.
Refitting
(
Removing
)
Place the clutch pedal switch in its housing rotating it in a clockwise/anti-clockwise direction until the retainer tooth can be heard clicking into the seat on the braket.Connect the electrical connection to the clutch pedal switch.Place the lower reinforcement in its housing on the underdashboard crossmember and fasten it using the bolts.Proceed with refitting 7040A30 Left instrument panel lower TRIM - R.R. .Proceed with refitting Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R..Proceed with refitting 7040A19 cushion padding - r r .Proceed with refitting 7040A65 passenger compartment box lock , one , r r .Proceed with refitting 7040L37 gear lever plate - r r .Connect the negative (-) battery terminal.
Removing
(
Refitting
)
Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).
