184001083 - 1092A10 CRANKSHAFT SERVICES PULLEY - R.R.

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B04 RIGHT FRONT WHEEL R RProceed with removalProceed with removal    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.Proceed with removal1. Fit a pin (8 mm diameter) through the hole on the gearbox, to be used for countertorque.    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R. 1092G10 single engine belt r r
Check that the pin is correctly inserted in the housing in the engine flywheel.
1. Undo the bolts (1a) and remove the crankshaft pulley (1b).
Refitting ( Removing ) 1. Place the crankshaft pulley (1a) back in its seating and secure it tightening the bolts (1b) to the specified torque.

FasteningComponentØValue(daNm)
1bBoltCRANKSHAFT PULLEYM8(Crankshaft flange side) 2.3 ÷ 2.8
Remove the pin from the hole on the gearbox.Proceed with refitting 1092G10 single engine belt r r .Proceed with refitting    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..Proceed with refitting    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Remove the car from the ramps.