184001287 - 4410D14 FRONT SUSPENSION CROSSBEAM - R+R WITH WISHBONES REMOVED

Removing ( Refitting ) Proceed with removal    Op. 1076B40 CENTRE EXHAUST PIPE - R.R.. Refitting ( Removing ) 1. Place the front suspension crossmember back in its housing using the hydraulic jack.2. Tighten the bolts (2a) and (2b) fixing the front suspension crossmember to the bodyshell to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2a	Side bolt	ENGINE OR ROD ANCHORAGE BEAM	M12	(Bodyshell side) 10.5 ÷11.6

	Fastening	Component	Ø	Value(daNm)
2b	Rear bolt	ENGINE OR ROD ANCHORAGE BEAM	M12	(Bodyshell side) 11.4 ÷ 12.6

3. Remove the hydraulic jack from underneath the front suspension crossmember.4. Tighten the bolts fixing the power steering box to the front suspension crossmember to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
4	Bolt	STEERING BOX (RACK AND PINION)	M12	(Front suspension crossmember side) 6.7 ÷ 7.4

Proceed with refitting    Op. 1076B40 CENTRE EXHAUST PIPE - R.R.. Proceed with refitting 1008C30 power unit lower reaction link r r .