1008B10 POWER UNIT FRONT MOUNT (TIMING SIDE) FLEXIBLE BLOCK - REPLACE - Fiat - MULTIPLA - eLearn

2891187 - 1008B10 power unit front mount (timing side) flexible block - replace

) Place the car on a ramp.Position a column jack beneath the engine to support it safely.1. Unscrew retaining bolt (1a) and withdraw. Unscrew retaining bolts (1b).Lower the column jack slightly so that the flexible block comes out more easily.2. Remove the flexible block from the engine.

Refitting ( Removing

) Fit the flexible block and tighten the bolts securing it to the body to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT RUBBER MOUNTS	M8	3.5

Tighten the central bolt securing the block to the rigid mount to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT RUBBER MOUNTS	M12 x 1.25	8

Remove the column jack.Remove the vehicle from the ramp.