2891500 - 1043A59 SOLENOID VALVE on LPG 'system submerged electric pump - R.R. with LPG tank and valve unit cover removed (GPOWER)

Removing ( Refitting )  - 1043B49  coil of lpg fuel system intake solenoid r rwith tank and valve unit cover removed .

Before servicing, ensure the tank has been sent to the appropriate centres for emptying and rendering inert, after agreement with T.D.A. (Italy)/Teseo (abroad).

Before working on the solenoid valve piston, drain any air remaining in the tank following the procedure described  - 1043A08  lpg tank check seal .

If a strong smell of LPG should be smelt during this operation, suspend the procedure immediately and send the tank back to the company responsible for drainage. A slight smell of LPG is considered normal.

1. Undo and remove the solenoid valve piston complete with seal. Refitting ( Removing ) Fit a new seal on the piston.Position the piston for the solenoid valve and tighten it.

	Fastening	Component	Ø	Value(daNm)
-	-	LPG UPTAKE SOLENOID	-	1.6 - 1.7

 - 1043B49  coil of lpg fuel system intake solenoid r rwith tank and valve unit cover removed .  - 1043A08  lpg tank check seal .