2891521 - 1810A24 clutch - r + r with gearbox removed
Removing
(
Refitting
)
1. Undo the retaining bolts (1a), then remove the pressure plate
(1b) complete with driven plate.
Refitting
(
Removing
)
Check the condition of the driven plate
and pressure plate.If there is excessive wear on the driven
plate's friction linings, either the linings or the complete driven
plate must be replaced.If the pressure plate shows signs of wear,
overheating or deep scoring, replace the assembly.If necessary, check using the specific
equipment, that the driven plate is no more than 0.25 mm off centre.1. Line up the driven plate for fitting the clutch assembly (1a)
using the centring pin (1b).2. Tighten the bolts securing the clutch to the engine block. | Name | Country |
|---|---|---|
| 1b | Clutch centering | 1.870.447.000 |
