3330E10 FLEXIBLE PIPE (ONE), LEFT OR RIGHT, TO FRONT BRAKE CALIPERS - R.R . - Fiat - MULTIPLA - eLearn

2891637 - 3330E10 FLEXIBLE PIPE (one), left or right, to front brake calipers - R.R .

) Place the car on a lift. - 4450B10 Front WHEEL (one) - R.R.Using a syringe, drain the brake fluid from the reservoir.1. Remove the protective cap from the bleed screw for the front brake caliper.2. Fit a transparent plastic pipe on the bleed valve.3. Insert the other end of the pipe in a container.

Loosen the bleed screw.Lower the brake pedal until it is in the end of travel position.Tighten the bleed screw when the brake pipe has been drained.1. Remove the spring for the connector between the flexible pipe and the rigid pipe.2. Using the tool (2a), undo the connectors (2b), then remove the flexible pipe (2c).

	Name	Country
2a	Box wrench for brake fittings	1.856.132.000

Refitting ( Removing

) Using a special spanner, tighten the connectors for the brake pipe.

	Name	Country
-	Box wrench for brake fittings	1.856.132.000

Secure the pipe to the bodyshell using the special spring. - 3330A10 BRAKE FLUID - Check level and top up, if necessary. - 3330A18 front or rear hydraulic brake system - bleed - 4450B10 Front WHEEL (one) - R.R.