2891666 - 3380A40 linkage supports and idlers - r+r

Removing ( Refitting ) Place the car on a lift.Raise the ramp.1. Undo the fixing nut (1a) and remove the support (1b) for the right rear drum flexible cable.2. Remove the spring (2a) and, using the tool (2b), undo the connector (2c).

	Name	Country
2a	Box wrench for brake fittings	1.856.132.000

3. Undo the fixing bolt (3a), release the handbrake cable (3b) and remove the mounting bracket (3c).4. Remove the plastic protection (4a) for the cable guide support, undo the fixing nuts (4b) and remove the cable mounting bracket (4c). Refitting ( Removing ) Position the cable guide support, tighten the fixing nuts and fit the plastic protection.Position the left rear drum cable mounting bracket and insert the handbrake cable in the special housing.Tighten the bracket fixing bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	HANDBRAKE LINKAGE MOUNTS	M8	2.5

Connect the two ends of the rear brake pipe and, using the tool, secure the connector nut.

	Name	Country
-	Box wrench for brake fittings	1.856.132.000

Fit the right rear drum cable mounting bracket and position the cable in the special housing.Tighten the fixing bolt to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	HANDBRAKE LINKAGE MOUNTS	M8	2.5

 - 3330A18  front or rear hydraulic brake system - bleed