2892682 - Introduction - STEERING

IMPORTANT

All the operations must be carried out with the utmost attention and care to avoid personal injury. When working on the system, strictly follow the safety instructions relating to the AIR BAG system (  See assembly 5580C   air bag system ) The engine compartment contains many moving parts, components at high temperature and live electrical cables.

Closely observe the following precautions when carrying out operations in the engine compartment.

• Turn off the engine and wait for it to cool down.
• Do not smoke.
• Do not use naked flames.
• Makre sure that an extinguisher is at hand in the work area.

For some procedures, the use of special Fiat tools is indicated. The use of these tools is essential in order to work in safety.Observe the current safety regulations concerning working in workshops. If necessary, the Manual indicates cases where special attention is required to avoid dangerous situations occurring.When using chemicals, closely follow the safety instructions given on the safety sheet which the supplier must give to the user (in Italy, in accordance with D.M. no. 47/1992).

WARNINGS

All the operations must be carried out with the utmost attention and care to avoid damaging the components.To release parts which are firmly stuck together, tap lightly using an aluminium or lead hammer for ferrous materials, or a wood or resin hammer for light alloy parts.During dismantling, check that parts which have to be marked carry the reference marks.During refitting, lubricate the parts as necessary to prevent seizures during the initial period of operation.During refitting, it is essential to observe the tightening torques and adjustment data.During refitting operations, replace gaskets, oil seals, spring washers, safety plates, self-locking nuts and any worn parts.