The graphic index and the description of the symbols appearing
in the repair procedures are given below.
1. Cut with hack-sawing machine2. Cut with circular saw3. Clean with rotary brush4. Remove spot welds with spot weld remover5. Remove spot welds with drill. Drilling for MIG welding6. Chiselling metal panel. Drilling for MIG welding7. Application of electro-weldable protection8. Application of thick electro-weldable protection9. Centring components10. Measurement11. Fixing components12. Fixing threaded rivets13. Checking alignment gaps14. Straightening edges with profiled stake and hammer15. Removing weld spots with chisel and hammer16. Removing treatment with pneumatic knife17. Spot welding18. MIG welding19. Welding with oxyacetylene torch20. Grinding21. Application of anti-corrosion protection22. Application of sealants23. Application of underbody protections24. Application of paints25. Application of wax-based protection26. Application of foam products
