| | Results of the tests |
| 1 | CHECK FIXING OF GEARBOXCONTROL
CABLES | All
OK | Problems
met | Operation |
|---|
| Check
the fixings of the gearbox control cables: they should not be slack
or incorrectly fixed | Continue to Step 2 | Lever support not fitted
correctly | Restore the correct fixing of the control cables Op. 2125C30 |
| Lever support not fitted correctly | Restore the correct fixing for the lever support Op. 2125C16 |
| 2 | CHECK GEARBOX CONTROL CABLES | All OK | Problems met | Operation |
|---|
| Check
the gearbox control cables: the ball joints and the bushes should
not be worn | Continue to Step 3 | Ball joints worn | Replace the control cables Op. 2125C30 |
| 3 | CHECK GEAR LEVER BALL | All OK | Problems met | Operation |
|---|
| Check
the gear lever ball joint: it should not be worn or too "closed" | Continue to Step 4 | Ball worn | Replace the gear lever Op. 2125C28 . |
| 4 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | Fault persists | Search for the
fault starting from another symptom' |