2888347 - E02 CLUTCH SLIPPING
During acceleration, a consistent increase in the engine speed is noticed without a corresponding increase in the speed of the vehicleThis symptom can be easily checked by pressing the clutch pedal and engaging 4th speed; when accelerating and gradually releasing the clutch pedal, the vehicle does not move and the engine does not cut out| Results of the tests | ||||
| 1 | CLUTCH PEDAL CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check clutch pedal action is smooth Check the pedal travel is correctly adjusted at both ends. | Continue to Step 2 | Pedal travel not correct | Restore the operation of the clutch pedal Op. 1820A14 | |
| 2 | CLUTCH PLATE CHECK | All OK | Problems met | Operation |
Check:
| Continue to Step 3 | Clutch plate or pressure plate faulty | Replace the clutch plate Op. 1810A20 | |
| Presence of oil or grease | Also replace the gearbox input oil seal Op. 2110C20 | |||
| 3 | CHECK SPLINED HUB | All OK | Problems met | Operation |
| Check for excess grease on the clutch plate hub bushes and the gearbox main shaft | Continue to Step 4 | Gearbox main shaft hub faulty | Replace the gearbox main shaft (see Assembly 2110B) | |
| Clutch plate hub bushes faulty | Restore the correct lubrication for the bushesIf necessary, replace the clutch plate Op. 1810A20 | |||
| 4 | FLYWHEEL CHECK | All OK | Problems met | Operation |
| Check the condition of the flywheel (in particular, the condition of the surface and that there are no signs of overheating, irregular wear, incisions or the removal of material) | Continue to Step 5 | Flywheel damaged | Replace the flywheel Op. 1024B22 | |
| 5 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |