E03 CLUTCH VIBRATING OR JERKING - Fiat - MULTIPLA - eLearn

2888348 - E03 CLUTCH VIBRATING OR JERKING

Whe the car sets off and the clutch is released, the vehicle does not start smoothly, but jerks or vibrates

1	CLUTCH PEDAL CHECK	All OK	Problems met	Operation
		Results of the tests
	Check the clutch pedal travel	Continue to Step 2	Pedal travel not correct	Restore the operation of the clutch pedal Op. 1820A14
2	ENGINE SUPPORT CHECK	All OK	Problems met	Operation
	Check the condition of the engine supports and reaction rod	Continue to Step 3	Engine supports faulty	Bed in the fixings: loosen the bolts, centre them in their housings and tighten them to the recommended torque (see Assembly 1008A)
	Check the condition of the engine supports and reaction rod	Continue to Step 3	Reaction rod faulty	Bed in the fixings: loosen the bolts, centre them in their housings and tighten them to the recommended torque (see Assembly 1008C)
3	CLUTCH PLATE CHECK	All OK	Problems met	Operation
	Check: clutch disc wear or "vitrification" that there is no damaged to the flywheel flexible coupling springs	Continue to Step 4	Clutch plate or pressure plate faulty	Replace the clutch disc or pressure plate Op. 1810A20
		Continue to Step 4	Presence of oil or grease	Also replace the gearbox input oil seal Op. 2110C20
4	FLYWHEEL CHECK	All OK	Problems met	Operation
	Check the condition of the flywheel (in particular, the condition of the surface and that there are no signs of overheating, irregular wear, incisions or the removal of material)	Continue to Step 5	Flywheel damaged	Replace the flywheel Op. 1024B22
5	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'