| | Results
of the tests |
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Connect
the diagnostic equipment (Examiner or other instruments) to the
diagnostic socket Check: - that there are no faults in the engine management control
unit
- plausibility of all the parameters
| Continue to Step 2 | An error is detected in
the control unit | Continue according to the instructions for the diagnostic
equipment |
| Lack of dialogue with the control unit | Restore the connection between the engine management
control unit and the diagnostic connector ( See E5030 PETROL ENGINE ELECTRONIC MANAGEMENT ). |
| 2 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | Fault persists | Search for the
fault starting from another symptom' |
