N01 CIGAR LIGHTER/CURRENT SOCKET NOT WORKING - Fiat - MULTIPLA - eLearn

2888431 - N01 CIGAR LIGHTER/CURRENT SOCKET NOT WORKING

With the ignition key in the ON position, when the cigar lighter is pressed or when a consumer is connected to the special connector, the cigar lighter/current socket is not working.

The power sockets all have a heat protection device: if devices with high energy absorption are connected, this protection cuts off the supply.

1	CURRENT SOCKET CHECK	All OK	Problems met	Operation
		Results of the tests
	Check the current socket: in particular, make sure that the thermal protection device inside the socket has not been affected due to overloading	Continue to Step 2	Thermal protection affected	Replace the thermal protection or the current socket Op. 7065C72
2	CIGAR LIGHTER ELECTRICAL CIRCUIT CHECK	All OK	Problems met	Operation
	Check, in order: cigar lighter fuse (services) cigar lighter earth connection between cigar lighter and junction unit. See E3070 CIGAR LIGHTER / CURRENT SOCKET	Continue to Step 3	Component defective	Replace the component involved (if a fuse is involved, search for the cause of the problem)
		Continue to Step 3	Connections not correct	Restore the connections
3	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'