N02 SUPPLEMENTARY POWER POINTS NOT WORKING - Fiat - MULTIPLA - eLearn

With the ignition key in the ON position, when a consumer is connected to the special current socket, it does not work.

The power sockets all have a heat protection device: if devices with high energy absorption are connected, this protection cuts off the supply.

1	CURRENT SOCKET CHECK	All OK	Problems met	Operation
		Results of the tests
	Check the current socket: in particular, make sure that the thermal protection device inside the socket has not been affected due to overloading	Continue to Step 2	Thermal protection in the dashboard socket affected	Replace the thermal protection or the current socket Op. 7065C84
		Continue to Step 2	Thermal protection in the rear socket affected	Replace the thermal protection or the current socket Op. 7065C86
2	CURRENT SOCKETS ELECTRICAL CIRCUIT CHECK	All OK	Problems met	Operation
	Check, in order: current sockets fuse services relay current sockets supply and earth See E3070 CIGAR LIGHTER / CURRENT SOCKET	Continue to Step 3	Component defective	Replace the component involved (if a fuse is involved, search for the cause of the problem)
		Continue to Step 3	Connections not correct	Restore the connections
3	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'