2891334 - 1088D23 sleeve from thermostat to rigid pipe carrying fluid to pump - r r

Removing ( Refitting ) Open the bonnet lid.With the ignition key in the OFF position, disconnect the battery negative terminal.1. Place a container under the vehicle to collect the coolant.  - 1048A10  air cleaner filtering element - replace1. Undo the retaining bolt.2. Move the wiring support bracket to one side.3. Disconnect the pump coolant intake sleeve from collar (3a) on the thermostat and from collar (3b) on the rigid pipe.4. Remove the sleeve from the engine bay. Refitting ( Removing ) Fit the sleeve.Connect the sleeve to the coolant intake hose and the thermostat.Fit the wiring support bracket and screw in the bolt - 1048A10  air cleaner filtering element - replaceConnect the lower engine coolant hose.Top up the engine coolant level- 1088A10 Engine COOLANT - Check density' and top up level, if necessary Connect the battery's negative terminal.Close the bonnet lid.