3320B20 REAR BRAKE SHOE CYLINDER (ONE) LEFT OR RIGHT - REPLACE. - Fiat - MULTIPLA - eLearn

2891595 - 3320B20 Rear brake shoe CYLINDER (one) left or right - Replace.

) - 4450B11 WHEEL (one) rear - R.R. - 3320B30 lh or rh rear brake drum (one) r r Bleed the braking system working on the rear drum only referring to op. 3330A18 front or rear hydraulic brake system - bleed1. Working from inside the vehicle, remove the protective boot (1a) for the handbrake lever.2. Loosen the adjustment nut for the handbrake cable.

1. Remove the protective cover.2. Disconnect the handbrake cable from the drum.3. Using the spanner (3a), disconnect the rigid connector (3b) for the rear brake pipe.

	Name	Country
3a	Box wrench for brake fittings	1.856.132.000

1. Position the tool (1a) on the shoe cylinder (1b).

	Name	Country
1a	Bracket	1.872.257.000

2. Using special pliers, remove the shoe return springs.

	Name	Country
-	Pliers	1.881.136.000

3. Remove the rear brake shoe return springs.4. Remove the clearance recovery device (4a) together with the two rear brake shoes (4b).5. Undo the fixing bolts (5a) and remove the shoe cylinder (5b).

Refitting ( Removing

) Position the special tool on the new shoe cylinder.

	Name	Country
-	Bracket	1.872.257.000

Tighten the shoe cylinder fixing bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR BRAKE DRUM CYLINDER	M6	0.8

Position the clearance recovery device together with the rear brake shoes.Position the rear brake shoe retaining springs.Position the shoe return springs.Remove the cylinder retaining tool.

	Name	Country
-	Bracket	1.872.257.000

Using a special spanner, tighten the rigid connector for the rear brake pipe.

	Name	Country
-	Box wrench for brake fittings	1.856.132.000

Connect the handbrake cable in the housing in the drum.Position the protective cover. - 3380A04 handbrake - check travel - 3330A18 front or rear hydraulic brake system - bleed - 3320B30 lh or rh rear brake drum (one) r r - 4450B11 WHEEL (one) rear - R.R.